CDOT crews pave US 40 east of Granby September 10 to 12

Travel Advisory

September 5, 2024 - Northwestern Colorado - Motorists should plan for up to 15 minute delays

Grand County - On Tuesday, Sept. 10, crews will perform three-day paving operations on US Highway 40 between Tabernash and Granby. Work will take place along a short segment of highway, approximately two miles east of Granby (Mile Points 216 to 217). Motorists will encounter up to 15 minute delays, full stops and one-lane alternating traffic between 7 a.m. and 5 p.m.

CDOT crews will work as swiftly as possible to complete the surface treatment; however resurfacing operations are weather dependent.

Traffic Impacts

Operations will take place Sept. 10 to 12. Daytime work hours will range from 7 a.m. to 5 p.m., Tuesday through Thursday. Traffic impacts include:

Motorists should plan for up to 15 minute delays and should allow for extra travel time
Vehicles will be guided by flagging personnel and signs
Access in and out of intersections may be restricted at times
A speed reduction of 40 mph will be enforced through the work zones

Map of US 40 paving operations between Granby and Tabernash — Colorado Department of Transportation Highway Maintenance Alert map of US 40 paving operations between Granby and Tabernash. Operations will take place Sept. 10 to 12 from 7 a.m. to 5 p.m.

Know Before You Go

Travelers are urged to “know before you go.” Gather information about weather forecasts, anticipated travel impacts and current road conditions before hitting the road. CDOT and other resources include:

Road conditions and travel information website: COtrip.org
Chain and traction law information: codot.gov/travel/winter-driving/tractionlaw
Sign up for project or travel alerts: bit.ly/COnewsalerts
See scheduled lane closures: bit.ly/laneclosures
Connect with @ColoradoDOT on social media: Twitter, Facebook, Instagram and YouTube
Weather forecasts: www.weather.gov
Check avalanche conditions at CAIC: www.avalanche.state.co.us

Remember: Slow For The Cone Zone

The following tips are to help you stay safe while traveling through maintenance and construction work zones.

Do not speed in work zones. Obey the posted speed limits.
Stay Alert! Expect the unexpected.
Watch for workers. Drive with caution.
Don't change lanes unnecessarily.
Avoid using mobile devices such as phones while driving in work zones.
Turn on headlights so that workers and other drivers can see you.
Be especially alert at night while driving in work zones.
Expect delays, especially during peak travel times.
Allow ample space between you and the car in front of you.
Anticipate lane shifts and merge when directed to do so.
Be patient!

Download the COtrip App!

The new free COtrip Planner mobile app was designed to meet the growing trend of information on mobile and tablet devices for the traveling public. The COtrip Planner app provides statewide, real-time traffic information, and works on mobile devices that operate on the iOS and Android platforms. Visit the Google Play Store (Android devices) or the Apple Store (iOS devices) to download!