Microstation Keyin reference

Angle
AA= Sets the active angle

Auxiliary Coordinate Systems
AD= Places relative data points
AX= Places absolute data points
PX= Deletes an ACS
RX= Attaches an ACS
SX= Saves the current ACS

Cells
AC= Sets the Active Cell and activates the Place Cell tool
AP= Sets the active pattern cell
AR= Sets the Active Cell, and activates Place Cell Relative
CC= Create Cell from fence or selection set
CD= Delete Cell from attached cell library
CM= Creates an array of cells
CR= Rename a cell in the attached cell library
LT= Sets the active line terminator cell
PT= Sets the active point used with the Place Point command.
RC= Attaches a cell library

Color
CT= Attaches a color table

Dimensioning
LD= Sets the level for dimension data
TV= Sets the dimensioning tolerance limits

Element Symbology
CO= Sets the active color
LC= Sets the active line style
WT= Sets the active line weight

Files
EL= Creates an element list file
FF= Copy the contents of a fence to a new or existing file
RD= Open another design file
RF= Attach a reference file
SF= Move the contents of a fence to a new or existing file
XD= Exchanges the active file with a reference file

Grid
GR= Sets the active grid reference spacing
GU= Sets the distance of the grid dots in working units
UR= Sets the unit round off

Line Terminators
LT= Sets the active line terminator cell
TS= Sets the scale factor for the active terminator

Levels
LV= Sets the active level
OF= Turns levels off
ON= Turns levels on

Patterns
AP= Sets the active pattern cell
PA= Sets the pattern angle for pattern cells
PD= Sets the spacing between patterns
PS= Sets the active pattern scale

Precision Input
DI= Places a data point at a given distance and direction
DL=Places a data point at a given X, Y and Z distance along the design axes
DX= Places a data point at a given X, Y and Z distances along the view axes
XY= Places a data point using absolute coordinates